Accumulator tank optimally prepared for connection to heat pumps in combination with solar panels.
NIBE VPAS is an accumulator tank that is primarily designed for connection to heat pumps in combination with solar panels.
NIBE VPAS consists of a hot water tank and a surrounding, double walled sheet steel jacket. The hot water tank is lined with copper or enamel to prevent corrosion. The insulation is polyurethane, which provides excellent heat insulation.
NIBE VPAS is equipped with immersion heater connections for the possibility of electrical addition and pocket tubes for temperature sensors to control water heating.
The insulation on NIBE VPAS can be removed, to facilitate work in confined spaces.
NIBE VPAS has four height adjustable feet.
Технические характеристики
| Corrosion protection |
Copper |
Enamel |
| Volume, hot water heater |
300 litres |
300 litres |
| Volume, double-shelled |
450 litres |
450 litres |
| Net weight |
315 kg |
300 kg |
| Height (excl. feet 20 – 55 mm) |
2015 mm |
2015 mm |
| Required ceiling height |
2120 mm |
2120 mm |
| Diameter |
Ø 860 mm |
Ø 860 mm |
| Heat content at 50 °C |
17,4 kWh |
17,4 kWh |
| Equivalent amount of hot water (40°C)* |
370 litres |
370 litres |
| Max. immersion heater length |
750 mm |
750 mm |
Rights to make any design modifications are reserved.
Solar coil: ø 22 mm, length 9.4 m, surface 2.3 m2
* With an incoming temperature of 10 °C and hot water usage of 12 l/min
